15062 Autoloader ALE: plate loaded incorrectly, remove plate from drum All A plate flyoff or reset occurred. It must be removed from the machine before selecting 'Plate Removed'. If no fly-off plate is found in the machine, then the fly-off sensor may be misaligned or damaged. Use "set drum chkfly 0" to disable the fly-off sensor to get the customer going and arrange for field service. Open the machine's front panel and remove the plate which is partially loaded onto the drum. Select 'Plate Removed' to continue. A flyoff or reset occurred while loading plate. It must be removed from the machine before selecting 'Plate Removed'. Damaged or mis-aligned fly-off sensor. Checked only before unload. ../nvs/drum_cfg_chkfly.xmlNVS: drum chkfly ..\..\ShowAllErrors.htmFirmware 0 Error Index ..\..\ShowAllCommands.htmFirmware 0 Command Index ..\..\ShowAllNVS.htmFirmware 0 NVS Index Updated: Wed Jul 16 19:32:50 2008 PST http://techplanet.creo.com/output/computer_to_plate/vlf_trendsetter/content/troubleshooting/15062.htmOther: Troubleshooting information